-
1 × $99.99 -
-
-
-
1 × $459.99 -
-
1 × $3,198.01 -
-
-
1 × $42.68 -
1 × $105.00 -
1 × $67.99 -
1 × $269.99 -
1 × $13.49 -
-
-
-
-
1 × $262.06 -
-
-
-
1 × $284.99 -
1 × $55.33 -
1 × $730.57 -
1 × $52.99 -
-
1 × $35.30 -
2 × $39.99 -
-
-
1 × $39.95 -
1 × $8.99 -
-
1 × $17.99 -
-
1 × $112.27 -
-
1 × $19.99 -
-
-
-
-
-
-
-
-
1 × $12.99 -
1 × $188.43 -
1 × $49.49 -
-
1 × $1,499.00 -
-
-
-
-
-
1 × $178.99 -
-
-
-
1 × $23.00 -
1 × $72.99 -
1 × $37.95 -
1 × $74.99 -
-
-
-
1 × $1,965.00 -
-
1 × $25.99 -
1 × $135.15 -
1 × $950.00 -
-
-
-
-
-
1 × $137.75 -
1 × $159.99 -
1 × $20.99 -
-
-
-
1 × $70.00 -
-
-
-
-
-
-
-
1 × $1,450.00 -
-
-
-
-
-
1 × $300.00 -
1 × $21.99
Fuel Flow Sensor with 10′ cable & T-connector
Fuel Flow Sensor Gasoline ONLY. 1 required per engine. Up to 3 engines supported.
Outputs:
- Fuel Flow
- Tank Fuel Used
- Trip Fuel Used
- Seasonal Fuel Used
Cable Length: 10′
Fuel Line Diameter: 3/8″ (9.5mm) Inside Diameter
Flow Rate Measured: Optimized for 0.6-45 Gal/hr but can measure outside these values
Added Back Pressure to the fuel system: 0.5 PSI at 20 Gal/hr; 1 PSI at 40 Gal/hr
Installation Location: Above the max level of the fuel tank, in-line after the fuel filter and any Y’s or T’s in the line
Package: The Fuel Flow Sensor, N2K T and 2 (two) 1″ hose clamps
Fuel Type: Gasoline only. The Fuel Flow Sensor does not operate diesel engine fuel systems
Hole required to route through a bulkhead: 22mm (7/8″)
Multiple Fule Flow sensors possible: Yes
